jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

A/C Liquid Line|Page 9917 > < A/C Discharge Line|Page 9914
Page 1
background image

Hose/Line HVAC: Service and Repair
A/C Liquid Line

Removal

REMOVAL

WARNING:  Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the
warnings and cautions could result in possible personal injury or death.

NOTE:  LHD model with 5.7L engine shown. RHD model and other engines similar.

1. Disconnect and isolate the negative battery cable.

2. Recover the refrigerant from the refrigerant system.

3. Remove the air cleaner housing, air intake tube and the resonator.

4. Remove the nut (3) that secures the A/C suction line (2) and the A/C liquid line (10) to the A/C expansion valve (1).

5. Disconnect the A/C suction line from the A/C expansion valve and remove and discard the O-ring seal.

6. Remove the nut (1) that secures the A/C liquid line (2) to the A/C receiver/drier (3).

7. Disconnect the A/C liquid line from the A/C receiver/drier and remove and discard the dual-plane seal.

A/C Liquid Line|Page 9917 > < A/C Discharge Line|Page 9914