jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Fog/Driving Lamp Switch|Description|Page 13289 > < Front Fog Lamp Relay|Page 13284
Page 1
background image

Fog/Driving Lamp Switch: Description and Operation
Description

DESCRIPTION

The rear fog lamp switch (2) is used only on vehicles manufactured for certain markets where the rear fog lamps are available and also equipped with the
optional automatic headlamp system. The rear fog lamp switch is integral to the upper switch pod (1) on the instrument panel. Only the switch push
button is visible on the outer surface of the switch pod.

The black, molded plastic switch pod housing encloses the switch push button mechanism and the switch circuitry including the switch contacts. A
connector receptacle is integral to the back of the switch pod housing. The switch is connected to the vehicle electrical system through a dedicated take
out and connector of the instrument panel wire harness.

The rear fog lamp switch cannot be adjusted or repaired and, if ineffective or damaged, the entire upper switch pod unit must be replaced.

Fog/Driving Lamp Switch|Description|Page 13289 > < Front Fog Lamp Relay|Page 13284