Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
Headlamp Bulb: Service and Repair
Installation
Boot - Headlamp Bulb
BOOT - HEADLAMP BULB
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Position the low beam boot (3) or high beam boot (1) to the back of the front lamp unit housing.
2. Push the inner circumference of the low beam boot or high beam boot down and around the bulb collar formation on the back of the lamp reflector
as necessary to fully engage the boot to the reflector.
3. Push the outer circumference of the low beam boot or high beam boot down and around the boot collar formation on the back of the lamp housing
as necessary to fully engage the boot to the housing.
4. Reinstall the low or high beam headlamp bulb into the front lamp.
5. Reinstall the front lamp unit onto the front of the vehicle.
Bulb - Headlamp
BULB - HEADLAMP
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
