jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Seat Belt Buckle Switch > < Seat Belt Buckle|Removal|Page 10328
Page 2
background image

frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor.
Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that
has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child
restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler Mopar(R) Parts Catalog.

1. Position the right outboard and center buckles (4) or the left buckle (3) and center seat belt (2) lower anchor to the rear seat back bracket (5) on the

rear floor panel.

2. Install and tighten the screw (1) that secures the rear seat belt buckle to the rear floor panel. Tighten the screw to 50 Nm (37 ft. lbs.).

3. Reinstall the rear seat cushion into the vehicle.

Seat Belt Buckle Switch > < Seat Belt Buckle|Removal|Page 10328