jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Ultrasonic Sensor, Antitheft|Removal|Page 938
Page 2
background image

5. Reinstall the trim onto the upper liftgate opening.

6. Position the bezel (1) over the transducer housing (2) of the intrusion sensor transmitter and press it straight upward until it snaps into place

against the headliner (3). Be certain to take the appropriate precautions not to soil or damage the headliner.

7. Reconnect the battery negative cable.

Sensors and Switches - Body and Frame > < Ultrasonic Sensor, Antitheft|Removal|Page 938