jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Steering Column Opening Cover|Page 9226 > < Air Bag System - Passenger Air Bag Deactivation|Page 9221
Page 1
background image

Steering Column Cover: Service and Repair
Steering Column Opening Cover

Removal

REMOVAL

1.   Disconnect and isolate battery negative cable.

2.   Remove the bolts (3) and remove the drivers side hush panel (2).

3.   Using a trim stick C-4755 or equivalent, separate the upper clips. and rotate the cover down and release the lower hinges at the bottom and remove

the opening cover.

4.   Rotate cover down to carpet and grasp part at its lower edge and pull up and rearward to snap off the lower hinge pins.

Installation

INSTALLATION

Steering Column Opening Cover|Page 9226 > < Air Bag System - Passenger Air Bag Deactivation|Page 9221