Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
-
3= Shift range is limited to 3rd gear.
-
2= Shift range is limited to 2nd gear.
-
1= Shift range is limited to 1st gear.
Tipping the shift lever will have the following results:
-
Tipping the selector lever toward "-" one time after another: The shift range is reduced in descending sequence by one gear each time, i.e.,
from D - 4 - 3 - 2 - 1. If the selected limitation of the shift range would result in a downshift causing excessive engine speed, the shifting is not
executed and the engaged gear as well as the shift range remain unchanged. This is to prevent the engine from overspeeding. Engine retardation is
low with the selector lever in position "D". To make use of the full braking power of the engine, "manual" downshifting by tipping the lever
towards the left-hand side is recommended. If this has been done, subsequent upshifting must be carried out manually as well.
-
Tipping the selector lever toward "-" and holding it in this position: The currently engaged gear in range "D" is indicated in the instrument
cluster display and the shift range is limited to this gear.
-
Tipping the selector lever toward "+" one time after another: The shift range is increased by one gear each time and the increased shift range
is displayed in the instrument cluster; possibly, the transmission upshifts to a faster gear.
-
Tipping the selector lever toward "+" several times: The shift range is increased by one gear each time the lever is tipped until the shift range
ends up in "D".
-
Tipping the selector lever toward "+" and holding it in this position: The shift range is extended immediately to "D", shift ranges are
indicated in ascending sequence; possibly, the transmission upshifts to a faster gear due to the extension of the shift range.
