Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
Valve Body Components
1. Lubricate valves and the housing valve bores with clean transmission fluid.
2. Install solenoid switch valve and plugs (5) and manual valve (4) into the valve body.
3. Install the retainers to hold each valve into the valve body.
4. Install the valve body check balls into their proper locations.
5. Position the separator and transfer plate onto the valve body.
6. Install the screws to hold the transfer plate to the valve body. Tighten the screws to 6 Nm (50 in. lbs.).
