Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
5. Pull axle shaft and backing plate out of axle tube until axle bearing (1) is exposed.
6. Remove O-ring (2) from the axle bearing.
7. Remove bearing from axle shaft (1).
8. Remove axle flange bolts.
Installation
INSTALLATION
NOTE: If a bearing flange stud is loose or has backed out tighten stud to 27 Nm (20 ft. lbs.).
1. Install axle flange bolts into axle flange.
2. Install axle shaft into the axle bearing.
