Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
20. Install the sector roller (1) onto the shift rail (2).
21. Using a suitable punch, align the holes in the sector roller with the hole in the shift rail and install the roll-pin to secure the sector roller to the shift
rail.
22. Apply bead of Mopar(R) Gasket Maker, or equivalent, to mating surface of rear housing as shown (2). Keep sealer bead width to maximum of 3
mm (1/8 inch). Do not use excessive amount of sealer as excess could be displaced into the oil pump.
23. Install the rear cover (1) onto the rear housing (2).
