Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
Transfer Case Actuator: Service and Repair
NV146 Transfer Case
Removal
REMOVAL
1. Raise the vehicle on a suitable hoist.
2. Disengage the wiring connector from the shift motor.
3. Remove the bolts (1) holding the shift motor (2) onto the transfer case.
4. Separate the shift motor (1) from the transfer case (3) and shift sector (2).
Installation
INSTALLATION
1. Verify that the shift motor O-ring is clean and properly positioned inside the machined O-ring groove of the shift motor.
NOTE: Verify that the missing tooth (2) in the shift motor drive spline (1)...