Grand Cherokee 4WD Laredo V8-4.7L (2002)
9. Install caliper bleed screw.
Rear Disc Brake Caliper
ASSEMBLY - REAR DISC BRAKE CALIPER
CAUTION: Dirt, oil, and solvents can damage caliper seals. Insure assembly area is clean and dry.
1. Lubricate caliper piston, piston seal and piston bore with clean brake fluid.
Piston Seal Installation
2. Install new piston seal into seal groove with finger.
NOTE: Verify seal is fully seated and not twisted.
Dust Boot On Piston
3. Install new dust boot on caliper piston and seat boot lip into piston groove.
4. Stretch boot rearward to straighten boot folds, then move boot forward until folds snap into place.
Caliper Piston Installation