Grand Cherokee 4WD Laredo V8-4.7L (2002)
CAUTION: When removing the radiator or A/C condenser for any reason, note the location of all radiator-to-body and radiator-to-A/C
condenser rubber air seals. These are used at the top, bottom and sides of the radiator and A/C condenser. To prevent overheating, these seals must
be installed to their original positions.
1. Disconnect the negative battery cable at battery.
2. Drain coolant from radiator. Refer to Cooling, Service and Repair See: Service and Repair
3. Remove the front grill. Refer to Body and Frame, Grille, Service and Repair See: Body and Frame/Grille/Service and Repair
4. Remove two radiator mounting bolts.
5. Disconnect both transmission cooler lines from radiator.
6. Disconnect electrical connector for the fan control solenoid.
7. Disconnect the power steering cooler line from cooler and filter. Refer tp Steering, Power Steering, Power Steering Line/Hose Service and Repair
See: Maintenance/Hoses/Power Steering Line/Hose/Service and Repair
8. Disconnect the radiator upper and lower hoses.
9. Disconnect the overflow hose from radiator.
10. Remove the air inlet duct at the grill.
