Grand Cherokee 4WD Laredo V8-4.7L (2002)
4. Remove the retaining nuts holding catalytic converter to exhaust pipe.
5. Disconnect the exhaust pipe from the exhaust manifold.
INSPECTION
Discard rusted clamps, broken or worn supports and attaching parts. Replace a component with original equipment parts, or equivalent. This will
assure proper alignment with other parts in the system and provide acceptable exhaust noise levels.
INSTALLATION
1. Connect the exhaust pipe to the engine exhaust manifold. Tighten the nuts (A) to 31 Nm (23 ft. lbs.).
NOTE: When servicing the exhaust system, replace the factory installed uni-clamp with standard u-bolt clamps.