Grand Cherokee 4WD Laredo V8-4.7L (2002)
License Plate Lamp: Service and Repair
License Plate Lamp Replacement
REMOVAL
Bulb
1. Remove lamp assembly from liftgate lamp module.
2. Rotate bulb socket counterclockwise to disconnect bulb socket from lamp.
3. Remove bulb from socket.
Fig.20 License Plate Lamp Housing
Lamp
1. Remove the screws attaching lamp assembly to liftgate..
2. Pull the lamp assembly away from the sheet-metal at extreme outboard edges to disengage the push pins.
3. Separate lamp assembly harness wiring connector.
4. Remove lamp.
INSTALLATION
Bulb
1. Install bulb in socket.
2. Install socket and bulb assembly in lamp housing.
3. Install lamp assembly in liftgate lamp module.
Lamp
1. Connect bulb harness to lamp assembly.
2. Position lamp assembly on liftgate and press outboard fasteners in place
3. Install screws in lamp assembly
