Grand Cherokee 4WD Laredo V8-4.7L (2002)
Fig.28 Left Multi-Function Switch Remove/Install
1. Position the left multi-function switch onto the housing.
2. Install and tighten the screws that secure the left multi-function switch housing. Tighten the screws to 2.5 Nm (22 in. lbs.).
3. Reconnect the instrument panel wire harness connector to the switch connector.
Fig.29 Steering Column Shrouds Remove/Install
4. Position the lower tilting steering column shroud to the underside of the steering column .
5. Install and tighten the screw that secures the lower steering column shroud housing. Tighten the screw to 1.9 Nm (17 in. lbs.).
6. Align the upper tilting steering column shroud to the lower shroud and snap the two shroud halves together.
7. Reconnect the battery negative cable.
Multi-Function Switch Mounting Housing
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY
