Grand Cherokee 4WD Laredo V8-4.7L (2002)
Fuse: Service and Repair
FUSE COVER
REMOVAL
1. Disconnect and isolate the battery negative cable
Fig.18 Instrument Panel Fuse Cover Remove/Install
2. Pull down on the rear edge (nearest the rear of the vehicle) of the instrument panel fuse cover until the rear latches unsnap from the tabs on the
lower junction block housing and the side latch unsnaps from the tab on the instrument panel steering column support bracket outboard of the
16-way data link connector (Fig. 18).
3. Move the instrument panel fuse cover towards the front of the vehicle to disengage the front latches from the mounting slots in the lower housing
of the body control module.
4. Remove the fuse cover from under the instrument panel.
Fig.19 Instrument Panel Fuse Cover Locator Channels
