Grand Cherokee 4WD Laredo V8-4.7L (2002)
18.
Remove the seven (7) brush guard/skid plate mounting bolts (Figure 7).
19.
For vehicles equipped with a trailer hitch, loosen but do NOT remove, the two (2) rear-most trailer hitch bolts (Figure 8).
20.
For vehicles equipped with a trailer hitch, use a pry bar (between brush guard/skid plate and hitch) to flex the left upper leg of the brush guard/skid
plate inboard to allow it to pass below the trailer hitch (Figure 8).
21.
For vehicles equipped with a trailer hitch, use a pry bar (between brush guard/skid plate and hitch) to flex the right upper leg of the brush
guard/skid plate inboard to allow it to pass below the trailer hitch (Figure 8).
22.
Lower the fuel tank assembly about 4-6 inches.
23.
Loosen the fuel filler hose clamp at the fuel tank nipple. Disconnect the filler hose from the fuel tank.
24.
Disconnect the vapor vent hoses from the fuel tank vents.