Grand Cherokee 4WD Laredo V8-4.7L (2002)
4. Press upward on release tab (Fig. 7) to remove sending unit from pump module.
INSTALLATION
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module (Fig. 6). The fuel pump module is
located within the fuel tank.
1. Position sending unit to pump module and snap into place.
2. Connect electrical connector to terminals.
3. Install fuel pump module. Refer to Fuel Pump Module Removal/Installation.
4. Install fuel tank Refer to Fuel Tank Removal/Installation.
