Grand Cherokee 4WD Laredo V8-4.7L (2002)
5. Reinstall the trim onto the right rear seat back.
6. Install and tighten the two screws that secure the belt web guide to the top of the right rear seat back panel. Tighten the screws to 2 Nm (20 in.
lbs.).
7. Reinstall the right rear seat back panel into the vehicle.
8. Restore the cargo area carpet to the base of the seat back panel and unfold the right rear seat back to its upright position.
9. Position the rear center seat belt lower anchor to the right rear seat belt buckle unit bracket on the rear floor panel.
10. Install and tighten the screw that secures the rear center seat belt lower anchor to the right rear seat belt buckle unit bracket on the rear floor panel.
Tighten the screw to 43 Nm (32 ft. lbs.).
11. Fold and latch the right rear seat cushion in its normal seating position.
