Grand Cherokee 4WD Laredo V8-4.7L (2002)
13. Remove collapsible preload spacer from pinion gear (Fig. 56).
14. Remove rear pinion bearing from the pinion with Puller/Press C-293-PA and Adapters C-293-42 (Fig. 57). Remove oil slinger/pinion depth shim
from the pinion shaft and record thickness.
INSTALLATION
NOTE: Pinion depth shims are placed between the rear pinion bearing cone and the pinion head to achieve proper ring and pinion gear mesh. If ring
and pinion gears are reused, the pinion oil slinger/ depth shim should not require replacement. Refer to Adjustments (Pinion Gear Depth) to select the
proper thickness shim before installing pinion gear.
1. Apply Mopar Door Ease or equivalent lubricant to outside surface of pinion bearing cups.