jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Front Door Window Glass|Service and Repair|Page 2262 > < Front Door Weatherstrip|Description and Operation|Page 2258
Page 1
background image

Front Door Window Glass: Service and Repair

TAILGATE WINDOW GLASS REPLACEMENT

1. Lower the tailgate.
2. Remove the tailgate carpet and access cover.
3. Remove the stud retainers from the regulator arm studs.

Tailgate Window Glass And Channels

4. Disconnect the window regulator arm studs from the channel.
5. Disconnect the tailgate window defogger and window motor wires.
6. Remove the tailgate glass and channels.
7. Clean the lower section of the new tailgate glass with isopropyl alcohol. Do not wipe or rub the defogger grid area when cleaning the glass.
8. Clean the glass channel.
9. Bond the seal to the bottom edge of the glass with 3M weatherstrip adhesive.

10. Apply weatherstrip adhesive to the channel groove and seat the glass and seal in the channel. Allow the adhesive to cure for 20-30 minutes before

installing the window.

11. Clean any excess adhesive from the window glass if necessary.
12. Install the side channels.
13. Install the window in the tailgate and attach the regulator arms to the channel.
14. Connect the motor and defogger wires.
15. Install the tailgate access panel and carpet.
16. Adjust the window glass if necessary.

Front Door Window Glass|Service and Repair|Page 2262 > < Front Door Weatherstrip|Description and Operation|Page 2258