Grand Wagoneer V8-360 5.9L VIN 7 2-bbl (1989)
Water Pump: Service and Repair
1.
Disconnect battery ground cable.
2.
Drain cooling system, then disconnect upper hose from radiator.
3.
Loosen drive belts and remove fan shroud, if equipped.
4.
Remove fan and hub assembly from water pump.
5.
On models equipped air conditioning, remove compressor bracket to water pump stud.
6.
On all models, remove alternator and mounting bracket assembly and position aside.
7.
Remove power steering pump to rear mounting bracket nuts.
8.
Remove front and rear power steering bracket to water pump mounting stud.
9.
Disconnect heater hose, bypass hose and lower radiator hose from water pump.
10.
Remove water pump and gasket from timing case cover.
11.
Reverse procedure to install. Torque water pump-to-cylinder block attaching bolts to specification and pump-to-timing cover bolts to
specification.
