Grand Wagoneer V8-360 5.9L VIN 7 2-bbl (1989)
Choke Diaphragm
6.
Using a hand held vacuum pump, apply vacuum to hold the choke diaphragm against the set screw. If vacuum is applied to the choke diaphragm
with a hand pump, an air leak may be noticed. This is normal. Do not press on the linkage rods.
Choke Valve Clearance Adjustment
7.
Measure the clearance between the lower edge of the choke valve and the top of the air horn.
8.
Adjust the clearance by turning the screw at the rear of the choke vacuum diaphragm. Refer to SPECIFICATIONS.
Fast Idle Linkage Adjustment
