jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Fuel Gauge - Excessive Movement|Page 160 > < Flash to Pass - Improper Operation|Page 151
Page 1
background image

Fuel Gauge Sender: Customer Interest
Fuel Gauge - Excessive Movement

Models

1986-1989 SJ Body

Subject

Excessive Fuel Gauge Movement

Index

FUEL

Date

October 16, 1989

No.

14-54-89

(C14-06-9)
P-3755

BODY CODE LEGEND

SJ - Grand Wagoneer

SYMPTOM/CONDITION

Some owners of the Grand Wagoneer may complain of excessive fuel gauge movement during normal vehicle operation. This condition may be caused
by a non-dampened fuel sender float arm.

DIAGNOSIS

Verify that the fuel level system is operating properly. Drive the vehicle and observe the fuel gauge. The excessive fuel gauge movement is most
noticeable during vehicle acceleration or deceleration, especially from a stop and with a low fuel tank volume. If this condition occurs, then proceed with
the following repair.

PARTS REQUIRED

1

Fuel Sender Unit Assembly

P/N 53006586

1

O-Ring

P/N J0941521

REPAIR PROCEDURE

1.

Remove battery negative cable.

2.

Drain fuel tank. Refer to the appropriate model year service manual.

3.

Remove fuel tank. Refer to the appropriate service manual.

4.

Remove the fuel gauge sender unit assembly.

5.

Install the new fuel gauge sender unit and a new sender unit O-ring.

6.

Install fuel tank and refill fuel tank.

7.

Install negative cable to battery.

8.

Start vehicle and check for leaks.

POLICY:

Reimbursable within the provisions of the warranty

Fuel Gauge - Excessive Movement|Page 160 > < Flash to Pass - Improper Operation|Page 151