Grand Wagoneer V8-360 5.9L VIN 7 2-bbl (1989)
3.
Inspect the bracket at the track bar ball stud seat for evidence of wear.
FIGURE 2
4.
Replace the track bar and/or bracket as required, and tighten the track bar bracket-to-frame rail bolts (A) to 121 N-m (90 ft.lbs.) of torque. Tighten
the track bar bracket-to-frame rail bracket locknuts (B) to 100 N-m (74 ft.lbs.) of torque. Tighten the track bar-to-frame rail bracket nut (C) to 85
N-m (63 ft.lbs.) of torque (Fig.2).
POLICY:
Reimbursable within provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
02-20-05-90
. . . . . . . . . .
0.2 Hrs.
INSPECT & RETORQUE TRACK BAR
02-20-05-91
. . . . . . . . . .
0.4 Hrs.
INSPECT & REPLACE TRACK BAR
FAILURE CODE:
68 - Noisy
