Liberty 2WD L4-2.4L VIN 1 (2005)
4. While continuing to pull the reflector toward the motor, firmly, steadily and forcefully push the headlamp leveling motor straight into the back of
the headlamp housing far enough to snap the ball on the end of the motor pushrod into the socket on the headlamp reflector.
5. After the pushrod is engaged to the reflector, remove your fingers from the headlamp reflector and thoroughly clean any fingerprints from the
reflector.
6. Push the mounting flange of the headlamp leveling motor into the keyed mounting hole on the back of the headlamp unit housing until the motor is
firmly seated.
7. Rotate the headlamp leveling motor clockwise about 30 degrees to lock it into place.
8. Reinstall the headlamp bulb into the headlamp housing.
9. Reconnect the battery negative cable.
