Liberty 2WD V6-3.7L (2008)
Front Bumper Cover / Fascia: Service and Repair
Front Fascia - Installation
INSTALLATION
1. Install fascia (5) to radiator support (3).
2. Connect the tabs securing the fascia (5) to the grille opening reinforcement and seat fully.
3. If equipped, connect the electrical connectors (4) for the fog lamp assemblies on both sides of the vehicle.
4. Install the push pins (4).
5. Install two screws (3) to the fascia bracket and tighten to 3 Nm (30 in. lbs.).
6. Install splash shieldsSee: Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Splash Shield - Installation.
