Liberty 2WD V6-3.7L (2008)
Trunk / Liftgate Shock / Support: Service and Repair
Support - Bracket/ Ball Stud
Removal
REMOVAL
1. Raise and support the lift gate with a lift gate support tool.
2. Remove the support cylinder (5) from the support cylinder bracket (2) and body.
3. Remove the bolts (3) from the support cylinder bracket (2).
4. Remove the bracket (2) from the lift gate (1).
5. Remove the ball stud (4) from the body.
Installation
INSTALLATION
1. Install the ball stud (4) to the body and tighten securely.
2. Install the bracket (2) to the lift gate (1).
3. Install the bolts (3) to the support cylinder bracket (2) and tighten the bolts.
4. Install the support cylinder (5) to the support cylinder bracket (2) and body.
5. Remove the lift gate support tool.