Liberty 2WD V6-3.7L (2008)
Console: Service and Repair
Floor Console Base Tray - Installation
INSTALLATION
1. Install the console (1) into the vehicle.
2. Install the two screws (5) to the rear of the console (1), located inside the console bin.
3. Install the two screws (2) in the front of console (1).
4. Install the bin (4) to the console (1).
5. Install the ash cup (3) to the console (1).
6. Connect the electrical connectors (3) to the end cap (2).
7. Align the end cap (2) to the console, use hand pressure to seat the clips.
8. If equipped, connect electrical connectors attached to shift bezel.
9. Align and use hand pressure to install the shift bezel into the floor console.