Liberty 2WD V6-3.7L (2008)
6. Connect the electrical connectors (3) to the end cap (2).
7. Align the end cap (2) to the console, use hand pressure to seat the clips.
8. If equipped, connect electrical connectors attached to shift bezel.
9. Align and use hand pressure to install the shift bezel into the floor console.
Console Shifter Bezel - Removal
REMOVAL
1. Using a trim stick C-4755 or equivalent, pry the shift bezel out of the floor console.
2. If equipped, remove electrical connectors attached to shift bezel.
Console Shifter Bezel - Installation
INSTALLATION
