Liberty 2WD V6-3.7L (2008)
NOTE: Install a union where the lift gate washer hose was cut during removal.
11. Connect the lift gate washer hoses (1) with a union at the A-pillar.
12. Connect the sunroof motor jumper (5).
13. Remove the tape backing from the spacer foam blocker (3), use hand pressure on the foam blocker to stick the headliner and the sunroof together.
14. Use hand pressure at the dual lock areas (1) of the headliner (4) to make sure the headliner sticks to the sunroof (2).
15. Connect the electrical connector (1) for the mirror (2).
