Liberty 2WD V6-3.7L (2008)
16. Connect the body harness connectors (3).
17. Attach the harness clip (1) to the D-pillar body (2).
18. Install the assist handles, See: Passenger Assist Handle/Service and Repair/Installation.
19. Install the visors, See: Sun Visor/Service and Repair/Sun Visor - Installation.
20. Install the visor supports, See: Sun Visor/Service and Repair/Sun Visor Support - Installation.
21. Install the overhead console, See: Console/Service and Repair/Overhead Console - Installation.
22. Install the A-pillar trim and grab handles, See: Trim Panel/Service and Repair/Pillar Trim/A-Pillar Trim Panel-Installation.
23. Install the upper B-pillar trim, See: Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
24. Install the quarter trim panels, See: Console/Service and Repair/Console Shifter Bezel - Installation.
25. Install the sunroof opening trim ring, if equipped.
26. Connect the negative battery cable.
