Liberty 2WD V6-3.7L (2008)
Trim Panel: Service and Repair
Front Door Trim Panel
Front Door Trim Panel - Removal
REMOVAL
1. Using trim stick C-4755 or equivalent, Remove the door handle trim bezel (3).
2. Remove the power window switch (2) and disconnect the electrical connector (1).
3. Using a very thin pry tool, release the cap screw cover (2) from the front door trim.
4. Remove the screws (1) from the front door trim.
5. Carefully remove the door trim panel from the door, by lifting upward until it is removed from the door lock and the mounting attachments (3) on
the carrier plate.
2. Remove the fastener (5) from the handle area of the front door trim (4).
3. Use a very thin pry tool to remove the cap screw covers (3) from the front door trim (4).
4. Remove the screws (2) from the front door trim (4).
5. Remove the power window switch and disconnect the electrical connector.
Front Door Trim Panel - Installation
INSTALLATION