Liberty 2WD V6-3.7L (2008)
5. Have an assistant operate the front "auto-open" function while applying 1/8 of a tube of grease per side to front drive cables until front of roof travels
1/2 way open. Press nozzle of grease application tubing against the slot of the corresponding drive cable channel (Fig. 2).
NOTE:
Rear header will move forward an additional 1.5" after the front header starts moving.
NOTE:
Be sure to stop top Front Header at the half way point.
NOTE:
If grease falls into slider track make sure to clean it out with alcohol.