Liberty 2WD V6-3.7L (2008)
Seat Back: Procedures
Front Seat
DISASSEMBLY
Driver Seat
WARNING: Before proceeding with the following repair procedure, review all warnings and cautions See: Restraint Systems/Service
Precautions.
1. Remove the front seat back, See: Removal and Replacement/Seat Back - Removal.
2. For the drivers seat illustration, See: Description and Operation/Seat - Description.
3. Remove the headrest (4).
4. Remove the seat back shield (19).
5. Remove the seat back cover (39).
6. Remove the left guide (5) and right guide (3) from the seat back cushion (2).
7. Remove the seat back cushion (2) from the seat back frame (16).
Passenger Seat
WARNING: Before proceeding with the following repair procedure, review all warnings and cautions See: Restraint Systems/Service
Precautions.
1. Remove the front seat back, See: Removal and Replacement/Seat Back - Removal.
2. For the passenger seat illustration, See: Description and Operation/Seat - Description.
3. Remove the headrest (3).
4. Remove the seat back shield (18).
5. Remove the seat back cover (48).
6. Remove the left guide (4) and right guide (2) from the seat back cushion (44).
7. Remove the seat back cushion (44) from the seat back frame (29).
Rear Seat
DISASSEMBLY
60/40 Seat Back- 60
1. Remove screw and trim covering from the hinge.