Liberty 2WD V6-3.7L (2008)
6. Remove the seat back trim panel (1) from the seat back frame (2).
7. Remove the hog ring attaching the seat back cushion to the seat frame.
8. Remove the seat cover clips from the seat back frame.
9. Depress the tabs (3) on the head rest guide (1) and remove from the top of the seat cushion (2).
10. Remove the cover and cushion from the seat back frame.
11. Position the seat cover to expose the hog rings and cut off all hog rings to separate the cover from the cushion.
Front Seat
ASSEMBLY
Driver Seat
WARNING: Before proceeding with the following repair procedure, review all warnings and cautions See: Restraint Systems/Service
Precautions.
1. For the drivers seat illustration, See: Description and Operation/Seat - Description.
2. Install the seat back cushion (2) to the seat back frame (16).
3. Install the left guide (5) and right guide (3) to the seat back cushion (2).
4. Install the seat back cover (39).
5. Install the seat back shield (19).
6. Install the headrest (4).
7. Install the front seat back, See: Removal and Replacement/Seat Back - Installation.
Passenger Seat
WARNING: Before proceeding with the following repair procedure, review all warnings and cautions See: Restraint Systems/Service
Precautions.
1. For the passenger seat illustration, See: Description and Operation/Seat - Description.
