Liberty 2WD V6-3.7L (2008)
1. Clean any debris off the mating surfaces of the HCU and ABM module.
CAUTION: When installing new O-rings or solenoid valve stem seals, do not use any type of lubricant.
2. If the seals on the components are not new, they must be replaced. Each of the solenoid valve stem seals (1) must be replaced do not reuse
solenoid valve stem seals.
3. The pump/motor connector O-ring (1) should also be replaced if not new
4. Align components and install the ABM module on the HCU.