Liberty 2WD V6-3.7L (2008)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor - Installation
INSTALLATION
NOTE: When installing, do not rotate sensor, as this may cause the sensor to rub on the tone ring and be damaged.
1. Install the wheel speed sensor to the vehicle.
2. Install the wheel speed sensor (1) through the brake shield and to the hub/bearing (3).
3. Install the wheel speed sensor wire hold down routing clips.
4. Install the wheel speed sensor mounting bolt (2) to the hub (3). Tighten the mounting bolt to 8 Nm (71 in. lbs.).
5. Install the disc brake rotor See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation.
6. Install the disc brake caliper adapter. See: Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper
Adapter - Installation.
7. Install the tire and wheel assembly See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement.