Liberty 2WD V6-3.7L (2008)
10. Lubricate rod bolts and bearing surfaces with engine oil. Install connecting rod cap and bearing. Tighten bolts to 27 Nm (20 ft. lbs.) plus 90°.
11. Install the following components:
-
Cylinder head(s). See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.
-
Timing chainman and cover. See: Timing Components/Timing Cover/Service and Repair/Timing Cover - Installation.
-
Cylinder head covers See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Installation.
-
Oil pan and gasket/windage tray. See: Engine Lubrication/Oil Pan/Service and Repair/Removal and Replacement/Engine Oil Pan - Installation.
12. Fill crankcase with proper engine oil to correct level.
13. Connect negative cable to battery.
