Liberty 2WD V6-3.7L (2008)
Intake Manifold: Service and Repair
Intake Manifold - Installation
INSTALLATION
1. Install the intake manifold seals.
2. Install the intake manifold.
3. Install the intake manifold retaining bolts and tighten in sequence shown to 12 Nm (105 in. lbs.).
CAUTION: Proper torque of the throttle body is critical to normal operation. If the throttle body is over-torqued, damage to the throttle body
can occur resulting in throttle plate malfunction.
4. Install the throttle body-to-intake manifold O-ring.
5. Install the throttle body (1) to intake manifold.
6. Install the four mounting bolts (2). Tighten bolts to 7 Nm (60 in. lbs.).
7. Install electrical connector (3).
