Liberty 2WD V6-3.7L (2008)
8. Install the fuel rail.
9. Install the EGR tube (1) See: Powertrain Management/Emission Control Systems/Exhaust Gas Recirculation/EGR Valve/Service and Repair/EGR
Valve - Installation
10. Install ignition coil towers.
11. Connect electrical connectors for the following components:
-
Manifold Absolute Pressure (MAP) Sensor (2)
-
Coolant Temperature (CTS) Sensor
-
Ignition coil towers
12. Install top oil dipstick tube retaining bolt.
13. Connect Vapor purge hose, Brake booster hose, Positive crankcase ventilation (PCV) hose.
14. Fill the cooling system.
15. Install the resonator assembly and air inlet hose.
16. Connect the negative cable to battery.
17. Using the scan tool, perform the ETC Relearn function.