Liberty 2WD V6-3.7L (2008)
Timing Chain: Removal and Replacement
Timing Chain & Sprockets - Removal
REMOVAL
1. Disconnect negative cable from battery.
2. Drain cooling systemSee: Cooling System/Service and Repair.
3. Remove right and left cylinder head coversSee: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Removal.
4. Remove radiator fan shroudSee: Cooling System/Radiator Cooling Fan/Service and Repair/Removal and Replacement/Radiator Fan - Removal.
5. Rotate engine until timing mark on crankshaft damper (2) aligns with TDC mark on timing chain cover (2) and the camshaft sprocket "V6" marks
are at the 12 o'clock position (No. 1 TDC exhaust stroke).
