Liberty 2WD V6-3.7L (2008)
NOTE: The pulley and bearing assembly can be removed from the compressor by hand or, if required, with a two jaw puller.
9. Remove the pulley and bearing assembly (1) from the front of the A/C compressor (2). If required, install a two jaw puller (3) and turn the puller
center-bolt clockwise until the pulley and bearing assembly is completely removed.
10. Remove the screw (1) that secures the clutch field coil wire lead bracket (2) to the A/C compressor (3).
11. Using compressor field coil remover (Special Tool 9354 in Kit 9349) (1) and a two jaw puller (2), remove the clutch field coil (3) from the front
of the A/C compressor (4).
Installation
VISTEON A/C COMPRESSOR