Liberty 2WD V6-3.7L (2008)
Evaporator Temperature Sensor / Switch: Service and Repair
Installation
INSTALLATION
NOTE: Illustration shown with instrument panel removed for clarity.
NOTE: LHD model shown. RHD model similar.
1. Install the evaporator temperature sensor (1) into rear of the HVAC housing (2) and connect the instrument panel wire harness connector.
2. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
3. Reconnect the negative battery cable.