Liberty 2WD V6-3.7L (2008)
Oil Change Reminder Lamp: Service and Repair
Change Oil Message (Base And Mid Line Clusters Only)
Your vehicle is equipped with an engine oil change indicator system. The "CHANGE OIL" message will flash in the instrument cluster odometer for
approximately 12 seconds after a single chime has sounded to indicate the
next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate
dependent upon your personal driving style.
Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. To turn off the message temporarily, press
and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance)
perform the following procedure:wing procedure:
1. Turn the ignition switch to the ON position. Do not start the engine.
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition switch to the LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.cedure.
