Liberty 2WD V6-3.7L (2008)
Spark Plug: Service and Repair
Spark Plug - Installation
INSTALLATION
Special care should be taken when installing spark plugs into the cylinder head spark plug wells. Be sure the plugs do not drop into the plug wells as
electrodes can be damaged.
Always tighten spark plugs to the specified torque. Over tightening can cause distortion resulting in a change in the spark plug gap or a cracked porcelain
insulator.
1. Start the spark plug into the cylinder head by hand to avoid cross threading.
2. Tighten spark plugs. Refer to Spark Plug Torque Specifications.
3. Before installing ignition coil(s), check condition of coil O-ring and replace as necessary. To aid in coil installation, apply silicone to coil O-ring.
4. Install ignition coil(s) See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil - Installation.
