Liberty 2WD V6-3.7L (2008)
Evaporative Emission Control Canister: Service and Repair
Vapor Canister - Removal
REMOVAL
The EVAP canister (1) is located under the vehicle behind the plastic splash shield (4) used for the left/rear tire. The ESIM switch (2) is attached to the
EVAP canister.
1. Raise and support vehicle.
2. Clean dirt or debris from canister vacuum lines.
3. Disconnect electrical connector (3) at ESIM switch (2).
4. Disconnect rubber hose (6) from ESIM switch (2).
5. Disconnect quick-connect fitting (5) at EVAP canister.
6. Remove nut/bolt (1) at front of canister mounting bracket (2).
