Liberty 2WD V6-3.7L (2008)
EGR Valve: Service and Repair
EGR Valve - Installation
INSTALLATION - 3.7L
1. Clean gasket area (1) at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (2). Tighten to 9 Nm (80 in. lbs.).
5. Position new gasket (3) between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve. Position end of tube (6) into intake manifold. Install two bolts (2). Tighten to 11 Nm (97 in. lbs.).
