Liberty 2WD V6-3.7L (2008)
6. Perform fuel pressure release procedure. Refer to Fuel Pressure Release Procedure.
7. Disconnect negative battery cable from battery.
8. Clean fitting of any foreign material before disassembly.
9. 2-Button Type Fitting: This type of fitting (1) is equipped with a push-button located on each side of quick-connect fitting (2). Press on both
buttons simultaneously for removal. Special tools are not required for disconnection.
10. Pinch-Type Fitting: This fitting (1) is equipped with two finger tabs (2). Pinch both tabs together while removing fitting. Special tools are not
required for disconnection.
11. Single-Tab Type Fitting: This type of fitting (3) is equipped with a single pull tab (1). The tab is removable. After tab is removed, quick-connect
fitting can be separated from fuel system component. Special tools are not required for disconnection.
